Automatic foil stampimg and diecutting platen SBL
820SEF
1 Computerized foil control system with 2 pulls to precisely control the foil length as desired.
2 12 zones heating unit with precise temperature controller. Heating zones temperature can be set individually.
3 Automatic impression on/off system, with tonnage searching program pre-set at low tonnage to avoid damaging die or machine.
4 High strength alloy gripper bar to ensure stability athigh speed.
5 Wide range of stock from light paper to b-flute.
6 Push and pull 2 in 1 side guide device to handle different stocks.
7 Both feeder and delivery unit standard with non-stop device to ensure continue production.
8 Touch screen monitor with computerized self-diagnostic system is easy to operate and helpful for troubleshooting on each section.
9 Cutting pressure is adjustable according to the stocks, easy operation.
10 Optional equipment available:
(1) 2-6 shafts hologram system.
(2) Brush rewinding device.
(3) Stripping device.
| Foil Stamping | |
| Longitudinal Puller shafts (optional) | 3 |
| Max. foil diameter | φ240 mm |
| Rewind shafts | 3 |
| Max. rewind diameter | φ260 mm |
| Max. stamp size | 800 x 580 mm |
| Max. stamp speed | 6500 S/H |
| Heating zones | 8zones |
| Heater power | 16 kw |
| Die-cutting | |
| Max. paper size | 815 x 600 mm |
| Min. paper size | 320 x 280 mm |
| Max. die-cutting paper size | 805 x 590 m |
| Die-cutting force | 200 Tons |
| Range of material thickness | 0.1 - 2 mm |
| Min. gripper margin | 9.5 mm |
| Inner size of die chase | 926 x 618 mm |
| Counter plate size | 848 x 600 m |
| Max. punching speed | 8000 S/H |
| Variable speed main motor | 7.5 kw |
| Other power required | 6 kw |
| Machine length | 5331 mm |
| Machine width | 2470 mm |
| Machine height | 2272 mm |
| Machine weight (approx.) | 12.5 Tons |
no data
no data
Документация(PDF). брошюра SBL 820SEF
(размер 1 МБ)